Category: Recreation

Bow Maker

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with use of only one hand to form large bows for gift baskets. This simple jig acts as a second holding hand. Two one-inch dowels are placed about seven inches apart on a plastic platform laid on a sheet of Dycem to keep it from slipping and the jig and the pad are held in place with a one-hand clamp. A plastic spring clip is bonded to the base and rests against the right-hand pillar. This clip holds one end of the ribbon, which is the wire- edged type for stiffness. The ribbon (about 50 inches )is then wound around the pillars several times. A short length of pipe cleaner is twisted around the middle of the bow and the excess cut off. Each layer of bow can then be lifted off and shaped. TITLE: The Bow Maker. WEB SITE: Workshop Solutions at REF: The originator, Tom Jeary, can be contacted at


Price Check
as of: 
Bow Maker