The Activity Tray is a height adjustable tray designed for use by people with upper extremity, fine motor, grasping or neurological disabilities or conditions such as multiple sclerosis, cerebral palsy or Parkinson's. Made of rugged ABS, the Activity Tray can be set at any of 4 available heights by pulling the easy-open handle. The tray has two recessed cutouts for placing mugs or cups and can be used to place food and drink closer to a person's mouth. The Activity Tray can be reversed so that
The Cut and Carve Cutting Board with Prongs is a double sided cutting board that enables a low-vision user to keep food in place to cut. The board also features no-slip grip feet that secure the product. Additionally, a raised border helps reduce liquid or crumb mess.
---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself adjustable tray for a child with severe disabilities to use drawing, coloring, etc. This DIY tray is a PVC frame with a leg in the middle to allow for angle adjustment. The tray is created from a piece of shower board which is cut to the size needed. The child is then measured and a cutout added to go around the child. The PVC frame is a little smaller than the tray itself and is attached to the tray using Velcro. A drill an
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding tray which fits against the child, will not slide away, and holds a plate in place. Instructions for building a table-top feeding tray of plywood (12 by 12 inches) with a rounded cutout on one side to fit against the child, a batten fastened on the underside, without interfering with the cutout, to keep it from sliding away, and 4 wood plate stops with turn buttons to hold the plate in place. Includes list of materials and drawings. SKILLS REQU
The Laptop Laidback Ergonomic Laptop Table is a bed desk that allows laptop users to be completely reclined. The height and angle of the laptop table surface can be micro-adjusted to accommodate an individual’s body size and arm length. The ergonomic design of this laptop table keeps the user's arms and elbows in a flat resting position while allowing the palm and fingers to lie flat on the keyboard.
The Non-Slip Tray, model HA-4255, is designed for use by individuals with balance, neurological, or upper extremity disabilities. This tray holds items without slippage at angles of up to 30 degrees. The tray is made with layers of wood veneer combined with synthetic resin to provide strength, with a non-slip coating which prevents items from sliding. DIMENSIONS: 360 x 280 millimeters. WEIGHT: 230 grams.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tray to protect table top or floor while child plays. Plywood tray 12 by 24 inches with 2 inch edging around 3 sides, and strips cut from a cork tile glued on the underside. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Toys for Your Handicapped Child REF: London, England: Souvenir Press: p 158-159. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R3463 PAGES (including cover): 2 1983.
CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation for a table for use in bed to hold remote controls for an individual with quadriplegia. A small table with a small cushion at the based filled with polystyrene beads was made. The cushion is medium stuffed so that it is very stable and will stay in the position it is pushed into. A table top was made from a plywood base with a lip around all four sides to prevent items from falling off. A piece of non-slip mat was added to the table but
The Tip 'N Grip Tray is a non-slip tray designed for use by individuals with balance, mobility, or upper extremity disabilities. The non-slip surface ensures that items placed on the tray will not slide under normal use. Available in rectangular or oval styles, the tray is dishwasher safe and the non-slip surface is designed not to wear off. DIMENSIONS: The rectangular tray is 18 3/4 x 14 7/8 inches and the oval tray is 22 3/4 x 14 3/4 inches. COLORS: Rectangular tray is cream color. Oval tray i